How to Use Analog Comparators in PIC16F877A (Mode-4)

The following code demonstrate how to use analog comparator module in mode-4. In this mode reference is common for two comparators. You can map output-1 C1OUT and output-2 C2OUT on any general purpose IOs. The code is written in “mikroC PRO for PIC v.6.6.3” IDE and simulation is done with Proteus 8.0 SP0. At the end of code, you can find complete project files for download.

Code in mikroC

// Two Common Reference Comparators

#define CMP_MODE    4

// user assign comparator o/p signals

sbit CMP1_Dir at TRISC.B0;

sbit CMP2_Dir at TRISC.B1;

sbit CMP1_Out at PORTC.B0;

sbit CMP2_Out at PORTC.B1;

// function proto-type

void CMP_Setting(void);

void main(void)

{

// set direction as output

CMP1_Dir = 0;

CMP2_Dir = 0;

// init value

CMP1_Out = 0;

CMP2_Out = 0;

CMP_Setting();

while(1)

{

// user assign comparators o/p signals

CMP1_Out = CMCON.C1OUT;

CMP2_Out = CMCON.C2OUT;

}

}

void CMP_Setting(void)

{

//Comparators Reset

#if CMP_MODE == 0

CMCON.CM2 = 0;

CMCON.CM1 = 0;

CMCON.CM0 = 0;

// One Independent Comparator with Output

#elif CMP_MODE == 1

CMCON.CM2 = 0;

CMCON.CM1 = 0;

CMCON.CM0 = 1;

// Two Independent Comparators

#elif CMP_MODE == 2

CMCON.CM2 = 0;

CMCON.CM1 = 1;

CMCON.CM0 = 0;

// Two Independent Comparators with Outputs

#elif CMP_MODE == 3

CMCON.CM2 = 0;

CMCON.CM1 = 1;

CMCON.CM0 = 1;

// Two Common Reference Comparators

#elif CMP_MODE == 4

CMCON.CM2 = 1;

CMCON.CM1 = 0;

CMCON.CM0 = 0;

// Two Common Reference Comparators with Outputs

#elif CMP_MODE == 5

CMCON.CM2 = 1;

CMCON.CM1 = 0;

CMCON.CM0 = 1;

// Four Inputs Multiplexed to Two Comparators

#elif CMP_MODE == 6

CMCON.CM2 = 1;

CMCON.CM1 = 1;

CMCON.CM0 = 0;

// Comparators Off

#elif CMP_MODE == 7

CMCON.CM2 = 1;

CMCON.CM1 = 1;

CMCON.CM0 = 1;

#endif

// Comparator Input Switch bit

// 1 = C1 VIN- connects to RA3/AN3

//     C2 VIN- connects to RA2/AN2

// 0 = C1 VIN- connects to RA0/AN0

//     C2 VIN- connects to RA1/AN1

CMCON.CIS = 0;

// Comparator 1 Output Inversion bit

// 1 = C1 output inverted

// 0 = C1 output not inverted

CMCON.C1INV = 0;

// Comparator 2 Output Inversion bit

// 1 = C2 output inverted

// 0 = C2 output not inverted

CMCON.C2INV = 0;

}

Download Files

For download “mikroC PRO for PIC” project and “Proteus 8.0” simulation files, click here.